Panasonic KX-TVP200BX, Руководство по обслуживанию

Страница: 280 / 448

4-66
System Administrator
4.5.5 System Parameter Settings
Value Range
(default)
Parameter
Description/Function Reference
E.M.D.
Service
p.3-22
M.W.N.-
Device
p.3-38
Specifies the sequence of codes used by the VPS
to make a call to an outside line. You can set up
to 12 digits. The default value is ‘T’, which
means that the VPS dials the outside phone
numbers after detecting dial tone. Outgoing Call
Setup Sequence Up to 12 digits
consisting of
0–9, , #,
F, R, S,
T, W
(T)
Example:
9W = [9]
→
1-second wait
→
dial outside phone
number.
‘9’ is the CO line access number.
F : Hook Flash
R : Ring Back Tone Detection
S : Silence Detection
T : Dial Tone Detection
W :Wait for 1 second
1–9, 0, , # : Dial Codes
4.5.5.6.3 Message Waiting Notification
The following parameters are used to control the handling of message notification
calls.
System Administration Top Menu
→
1
→
5
→
6
→
3
Program – System Parameter – Others – Message Waiting Notification Menu
Outgoing Call Ports -------------------------------------------------- : 1-12
Message Waiting Lamp Ports ------------------------------------ : 1-12
Message Waiting Lamp for Every Message ---------------- : No
Max. Digits for Callback No. (1-48 digits) ------------------- : 20
Callback No. Entry Interdigit Time-out (1-10 sec) -------- : 5
System Callback No. ------------------------------------------------ : . . . . . . . . . . .
: . . . . . . . . . . .