Panasonic KX-TVM50, Руководство по установке

Страница: 115 / 200

4.
Assignment of the VPS card and its model
a.
Go to the 1-4 VPS (DPT) Port Assignment screen.
b.
Select the corresponding equipment number in the TVP No. menu.
c.
Select your VPS model in the Type menu.
KX-TVM50: Select TVP200-1
KX-TVM200 AL, NZ, SP, NL, JT, G, SE: Select TVP200-1
All other KX-TVM200 models: Select TVP300
d.
Select the card (101: DLC/DHLC for jacks 1-8; 201: DLC/DHLC for jacks 9-12) which connects with
the VPS in the
VPS Card menu.
5.
Assignment of the extension ports connected to the VPS
a.
Continue programming in the 1-4 VPS (DPT) Port Assignment screen.
b.
Select the extension port number of the card (DLC/DHLC) to which the VPS (DPT) jack is to be
connected in the
Port No. menu. This program tells the KX-TD500 which extension ports are connected
to the VPS. This allows the KX-TD500 to send the proper DPT integration information to these ports.
Jack No. 1 must be assigned, because its port is used as the channel to control the VPS.
Note
•
This menu is displayed only when the attribute of the ports is assigned to VPS (DPT) in step
2.
•
Depending on the software version of the KX-TD500, you can assign a maximum of 12 jacks
(24 ports) with the KX-TD500.
c.
Assign DN for the port (click DN Refer to check the available directory numbers).
Note
•
This program allows you to assign an extension number to each Voice Mail port. Since each
port connected to the VPS provides two extensions, this enables you to assign extension
numbers to each port. To reach the VPS, users dial these extension numbers.
Document Version 2.1 2008/04 Installation Manual 115
4.5 KX-TD500 PBX Programming for DPT Integration