manualshive.com logo in svg

Panasonic KX-TVM50, Руководство по установке

Поделиться
Скачать
Panasonic KX-TVM50 Скачать руководство пользователя страница 11

Precautions for Users in the United Kingdom

FOR YOUR SAFETY PLEASE READ THE FOLLOWING 

TEXT CAREFULLY.

This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp fuse
is fitted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating
of 5 amps and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark 

 or the BSI mark 

 on the body of the fuse. If the plug contains a

removable fuse cover, you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover,
the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased
from your local Panasonic Dealer.

IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR PREMISES,
THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE
IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13
AMP SOCKET.

If a new plug is to be fitted, please observe the wiring code as shown below.
If in any doubt, please consult a qualified electrician.

WARNING

THIS APPLIANCE MUST BE EARTHED.

IMPORTANT

The wires in this mains leads are coloured in accordance with the following code:
Green-and-Yellow: Earth
Blue: Neutral
Brown: Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows.

The wire that is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug that is marked
with the letter E or by the safety earth symbol 

 or coloured GREEN or GREEN-AND-YELLOW.

The wire that is coloured BLUE must be connected to the terminal that is marked with the letter N or coloured
BLACK.

The wire that is coloured BROWN must be connected to the terminal that is marked with the letter L or coloured
RED.

Document Version  2.1  2008/04

Installation Manual

11

Precautions for Users in the United Kingdom

Содержание KX-TVM50









































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды