Panasonic KX-TSC11 Скачать руководство пользователя | Manualshive

Страница: 38 / 48

background image

Important Safety Instructions

38

CAUTION:

To reduce the risk of fire or injury to persons, read and follow these instructions.

1. Use only the battery(ies) specified.
2. Do not dispose of the battery(ies) in a fire. It (they) may explode.
3. Do not open or mutilate the battery(ies). Released electrolyte is corrosive and

may cause burns or injury to the eyes or skin. The electrolyte may be toxic if
swallowed.

4. Exercise care in handling the battery(ies) in order not to short the battery(ies)

to conductive materials such as rings, bracelets, and keys. The battery(ies)
and/or conductor may overheat and cause burns.

5. Do not recharge the battery(ies) provided with or identified for use with this

product. The battery(ies) may leak corrosive electrolyte or explode.

6. Do not attempt to rejuvenate the battery(ies) provided with or identified for use

with this product by heating. Sudden release of battery electrolyte may occur
causing burns or irritation to the eyes or skin.

7. Replace all batteries at the same time. Mixing fresh and discharged batteries

could increase internal cell pressure and rupture the discharged batteries.
(Applies to products employing more than one separately replaceable primary
battery.)

8. When installing batteries observe the proper polarity or direction. Incorrect

installation can cause charging, and may result in leakage or explosion.
(Applies to products employing more than one separately replaceable primary
battery.)

9. Remove the battery(ies) from this product if the product will not be used for a

long period of time (several months or more). During this time the battery(ies)
could leak in the product.

10. Discard the dead battery(ies) as soon as possible. The dead battery(ies) may

leak in the product.

11. Do not store this product, or the battery(ies) provided with or identified for use

with this product, in high temperature areas. Batteries that are stored in a
freezer or refrigerator for the purpose of extending shelf life should be
protected from condensation during storage and defrosting. Batteries should
be stabilized at room temperature prior to use after cold storage.

E-PQQX14369ZA.book 38 ページ２００４年１２月１０日金曜日午後４時１分

«
...
36
37
38
39
40
...
»

Содержание KX-TSC11

















































Отзывы:

Нет отзывов

Похожие инструкции для KX-TSC11

Бренд: Talkswitch Страницы: 26

Бренд: DAC Limited Страницы: 12

Бренд: Radio Shack Страницы: 36

Бренд: gesko Страницы: 16

1102B - NBX Business Phone VoIP

Бренд: 3Com Страницы: 96

Бренд: WaterGroup Страницы: 24

Бренд: Amplicomms Страницы: 75

Comfort Pro CM 510

Бренд: T-Home Страницы: 156

Бренд: france telecom Страницы: 31

Бренд: Kogan Страницы: 8

Бренд: Binatone Страницы: 32

Бренд: FMUser Страницы: 16

Бренд: felisa Страницы: 10

Бренд: Shure Страницы: 15

Бренд: Curtis Страницы: 9

Бренд: JVC Страницы: 2

Бренд: LG Страницы: 72

Бренд: LG Страницы: 30

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды