manualshive.com logo in svg

Panasonic KX-TSC11, Руководство по эксплуатации

Panasonic KX-TSC11 - удобный и надежный стационарный телефон, идеально подходит для дома или офиса. Чтобы ознакомиться с инструкциями по эксплуатации, скачайте бесплатный руководство по эксплуатации с manualshive.com. Идеальный выбор для тех, кто ищет простое и надежное устройство для связи.

Поделиться
Скачать
background image

 

41

 

Useful Inf

ormation

 

For assistance, please call: 1-800-211-PANA(7262)

CAUTION:

 

Any changes or modifications not expressly approved by the party responsible for 
compliance could void the user’s authority to operate this device.

 

Note:

 

This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected.

— Consult the dealer or an experienced radio/TV technician for help.

This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section 
68.316.  

A TIA/EIA-IS-968 compliant telephone cord and modular plug is provided with this 
equipment. This equipment is designed to be connected to the telephone network
or premises wiring using a compatible modular jack that is also TIA/EIA-IS-968 
compliant.

•

 

Environment

 

—do not place the unit in a room where the temperature is less than 

5°C (41°F) or greater than 40°C (104°F). Allow 10 cm (4

 

q

 

) clearance around the 

unit for proper ventilation. Avoid excessive smoke, dust, mechanical vibration, 
shock, or direct sunlight.

•

 

Routine care

 

—wipe the unit with a soft cloth. Do not use benzine, thinner, or any 

abrasive powder.

•

 

If there is any trouble

 

—disconnect the unit from the telephone line and connect a 

known working phone. If the known working phone operates properly, have your 
unit repaired by one of the authorized Panasonic Factory Service Centers. If the 
known working phone does not operate properly, consult your telephone company.

When you hold the phone to your ear, noise might be heard in your Hearing Aid. 
Some Hearing Aids are not adequately shielded from external RF (radio 
frequency) energy. If noise occurs, use an optional headset accessory or the 
speakerphone option (if applicable) when using this phone. Consult your 
audiologist or Hearing Aid manufacturer about the availability of Hearing Aids 
which provide adequate shielding to RF energy commonly emitted by digital 
devices.

E-PQQX14369ZA.book 41 ページ ２００４年１２月１０日 金曜日 午後４時１分

Содержание KX-TSC11

















































Отзывы:

Нет отзывов

Похожие инструкции для KX-TSC11

NEC UX5000 Hardware Manual preview
UX5000
Бренд: NEC Страницы: 334
NEC AccuSync 120 Advanced Features Manual preview
AccuSync 120
Бренд: NEC Страницы: 12
Xblue Networks PCS digital User Manual preview
PCS digital
Бренд: Xblue Networks Страницы: 32
Panasonic KX-TGP600 How To Use preview
KX-TGP600
Бренд: Panasonic Страницы: 5
Panasonic KX-TGP600 Quick User Manual preview
KX-TGP600
Бренд: Panasonic Страницы: 4
Panasonic KX-TGP600 Quick Start Manual preview
KX-TGP600
Бренд: Panasonic Страницы: 24
Panasonic KX-TD816 Quick Reference Manual preview
KX-TD816
Бренд: Panasonic Страницы: 42
Panasonic KX-TGP700 Quick Start Manual preview
KX-TGP700
Бренд: Panasonic Страницы: 135
Yealink W76P Quick Start Manual preview
W76P
Бренд: Yealink Страницы: 8
Yealink W56 Quick Reference Manual preview
W56
Бренд: Yealink Страницы: 2
Subpac M2X Manual preview
M2X
Бренд: Subpac Страницы: 15
Voyager CL-2200XP ALPHA User Manual preview
CL-2200XP ALPHA
Бренд: Voyager Страницы: 45
Lucent Avaya 6402D User Manual preview
Avaya 6402D
Бренд: Lucent Страницы: 9
Sailor Sailor System 5000 MF/HF User Manual preview
Sailor System 5000 MF/HF
Бренд: Sailor Страницы: 56
AGFEO ST 31 User Manual preview
ST 31
Бренд: AGFEO Страницы: 20
Haken Audio EaganMatrix User Manual preview
EaganMatrix
Бренд: Haken Audio Страницы: 7
BT 4000 Classic Quick Setup And User Manual preview
4000 Classic
Бренд: BT Страницы: 64
T+A DD 820 M User Manual preview
DD 820 M
Бренд: T+A Страницы: 70

Бренды по названию

Популярные бренды

Загрузить еще бренды