![background image](http://html.mh-extra.com/html/panasonic/kx-ts800/kx-ts800_operating-instructions-manual_279831032.webp)
32
Useful Information
For assistance, please visit http://www.panasonic.com/help
Troubleshooting
Problem
Cause/solution
The unit does not work.
≥
Check the connections (page 9).
≥
Remove the batteries and reinstall them to reset
the unit.
I cannot hear a dial tone.
≥
Disconnect the unit from the telephone line and
connect the line to a known working telephone. If
the working telephone operates properly, contact
our service personnel to have the unit repaired. If
the working telephone does not operate properly,
contact your service provider/telephone
company.
The unit does not ring.
≥
The RINGER selector is set to OFF. Set to HIGH
or LOW (page 13).
The display is blank.
≥
Install new batteries (page 8).
LCD display response is slow.
≥
Change LCD contrast setting to higher level
(page 21).
≥
Batteries are running low. Install or replace the
batteries.
You cannot dial.
≥
Check the dial tone. If there is no dial tone, check
the connections (page 9).
≥
The dialing mode may be set incorrectly. Change
the settings (page 11).
≥
The dialed number is restricted. To cancel, see
page 22.
The other party suddenly
cannot hear your voice during a
conversation.
≥
{
MUTE
}
may have been pressed during the
conversation.
To cancel, press
{
MUTE
}
again (page 14).
You cannot program items such
as the dialing mode.
≥
Programming is not possible when:
s
the handset is off the cradle.
s
viewing caller information.
s
“
” is displayed.
s
“
W
” is displayed.
≥
Do not pause for over 60 seconds while
programming.
You cannot make long distance
calls.
≥
Make sure that you have long distance service.
KX-TS880.book Page 32 Friday, October 15, 2010 5:04 PM