![background image](http://html.mh-extra.com/html/panasonic/kx-ts800/kx-ts800_operating-instructions-manual_279831027.webp)
27
For assistance, please visit http://www.panasonic.com/help
Voice mail service
Voice mail is an automatic answering
service offered by your service
provider/telephone company. After
you subscribe to this service, your
service provider/telephone company’s
voice mail system answers calls for
you when you are unavailable to
answer the phone or when your line is
busy. Messages are recorded by your
service provider/telephone company,
not your telephone. Please contact
your service provider/telephone
company for details of this service.
Listening to voice mail
message(s)
The unit lets you know that you have
new voice mail messages in the
following way:
s
“
Voice mail
” is displayed.
1
Lift the handset or press
{
SP-PHONE
}
and dial an access
phone number.
s
You will get an access phone
number from your telephone
company.
2
Follow the pre-recorded
instructions.
3
Press
{
SP-PHONE
}
if using the
speakerphone.
s
“
Voice mail
” will disappear from
the display.
s
If “
Voice mail
” still display after
you have listened to your voice mail
messages, press
{
PROGRAM/
EXIT
}
, and then press and hold
{
CLEAR
}
and “
Voice mail
” will
disappear.
Voice mail (VM) tone
detection
Your service provider/telephone
company sends special signals
(sometimes called “voice mail tones”
or “stutter tones”) to the unit to let you
know you have new voice mail
messages. If you hear a series of dial
tones followed by a continuous dial
tone after lifting the handset, you have
new voice mail messages. Soon after
you hang up a call or after the phone
stops ringing, your unit checks the
phone line to see if new voice mail
messages have been recorded.
Turn this feature off when:
s
You do not subscribe to voice mail
service.
s
Your service provider/telephone
company does not send voice mail
tones.
s
Your phone is connected to a PBX. If you
are not sure which setting is required,
contact your service provider/telephone
company.
Turning VM tone detection
on/off
The default setting is “On”.
1
{
PROGRAM/EXIT
}
2
{
4
}
/
{
3
}
: “
Program ?
”
>
{
OK
}
3
{
4
}
/
{
3
}
: “
VM tone detect ?
”
>
{
OK
}
4
{
4
}
/
{
3
}
: Select the desired
mode
>
{
OK
}
5
{
PROGRAM/EXIT
}
Voice Mail Service
KX-TS880.book Page 27 Friday, October 15, 2010 5:04 PM