Panasonic KX-TS500MXB, Инструкция по эксплуатации

Страница: 10 / 32

Note:
Refer to
Main (Flow Solder Side View) ()
12. CIRCUIT OPERATIONS
12.1. Telephone Line Interface and Pulse Dial Circuit
When the hook switch SW1 is ON (off-hook), the circuit is closed, and current is supplied to the
base of Q2 via the diode bridge D17 and Q2 is On Q1 is ON (OFF-HOOK condition).
Q1 and Q2 are the dial pulse generating circuits, and are driven by the DIALER (IC1), when the
DIALER Pin 10 of IC1 is LOW Q2 is OFF and Q1 is OFF (break). If port Pin 10 is HIGH Q2
is ON Q1 is ON (make).
12.2. Tone Dial Circuit
Function:
The tone dialing circuit consists of a DTMF (Dual Tone Multi Frequency) signal generator
(outputted from Pin 25 of the IC1) for tone dialing, and also a circuit for outputting the signal to
line.
The DTMF circuit identifies inputs from the 12 keys (1,2,3,4,5,6,7,8,9,0, and #) by means of a
total of seven frequencies, that is four low frequencies (Low group) and three high frequencies
(High group).
Circuit Description:
When a dial key is pressed, a DTMF signal is output from Pin 25 of IC1 as an analog synthetic
10