– 5 –
Wall mounting
1
Drive the screws (not supplied) into the wall.
2
Mount the charger (
A
), then slide it down (
B
) and to the right (
C
)
until it is secure.
Note:
L
Make sure that the wall is strong enough to support the weight of the
unit.
For your safety
To prevent severe injury and loss of life/property, read this section carefully before
using the product to ensure proper and safe operation of your product.
WARNING
Power connection
L
Completely insert the AC adaptor/power plug into the power outlet. Failure to do
so may cause electric shock and/or excessive heat resulting in a fire.
L
Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it
from the power outlet, then wiping with a dry cloth. Accumulated dust may cause
an insulation defect from moisture, etc. resulting in a fire.
L
Unplug the product from power outlets if it emits smoke, an abnormal smell, or
makes an unusual noise. These conditions can cause fire or electric shock.
Confirm that smoke has stopped emitting and contact your phone system dealer.
Installation
L
To prevent the risk of fire or electrical shock, do not expose the product to rain or
any type of moisture.
25 mm
Screws
A
B
C
TPA50_08(e).fm Page 5 Tuesday, February 11, 2014 2:45 PM