– 4 –
Registering a handset to the base unit
1
Base unit:
N
KX-TGP500 series
Press and hold
{
ALL
}
for about 4 seconds until the STATUS
indicator flashes in red.
N
KX-TGP550 series
Press and hold
{
ALL
}
for about 4 seconds until the registration tone
sounds and the STATUS indicator flashes in red.
L
If all registered handsets start ringing, press the same button to
stop. Then repeat this step.
L
The next step must be completed within 90 seconds.
2
Handset:
{
OK
L
}
3
Wait until
“
Enter Base PIN
”
is displayed.
i
Enter the base unit
PIN (default:
“
0000
”
).
i
Press
{
OK
}
, then wait until a long beep
sounds.
L
If you forget your PIN, contact your phone system dealer.
Note:
L
If an error tone sounds, or if
_
is still displayed, register the handset
according to the registering section of the base unit’s User Guide on
the Panasonic Web site. See page 1 for Panasonic URL.
Belt clip
N
To attach
N
To remove
TPA50_08(e).fm Page 4 Tuesday, February 11, 2014 2:45 PM