Setting Up
18
Note for battery charge
L
It is normal for the handset to feel
warm during charging.
L
Clean the charge contacts of the
handset and charger with a soft and
dry cloth once a month. Clean more
often if the unit is exposed to grease,
dust, or high humidity.
Battery level
Panasonic Ni-MH battery
performance (supplied batteries)
Note:
L
It is normal for batteries not to reach
full capacity at the initial charge.
Maximum battery performance is
reached after a few complete cycles of
charge/discharge (use).
L
Actual battery performance depends
on a combination of how often the
handset is in use and how often it is
not in use (standby).
L
Even after the handset is fully
charged, the handset can be left on
the charger without any ill effect on the
batteries.
L
The battery level may not be
displayed correctly after you replace
the batteries. In this case, place the
handset on the charger and let it
charge for at least 6 hours.
Setting network
Important:
L
We recommend configuring these
settings with your administrator. You
can also configure the network
settings through the Web user
interface. Contact your administrator
for further information.
Automatic setup (default)
Turning the DHCP connection mode
on
1
{
MENU
}
(center of joystick)
i
{#}{
5
}{
0
}{
0
}
2
{V}
/
{^}
:
“
On
”
i
{
SAVE
}
3
{V}
/
{^}
:
“
Automatic
”
i
{
SAVE
}
i
{
OFF
}
1
{
MENU
}
(middle soft key)
i
{#}{
5
}{
0
}{
0
}
2
{V}
/
{^}
:
“
On
”
i
{
SAVE
}
3
{V}
/
{^}
:
“
Automatic
”
i
{
SAVE
}
i
{
EXIT
}
Static setup
Turning the DHCP connection mode
off
1
{
MENU
}
(center of joystick)
i
{#}{
5
}{
0
}{
0
}
2
{V}
/
{^}
:
“
Off
”
i
{
SAVE
}
i
{
OFF
}
Icon
Battery level
&
High
(
Medium
)
Low
0
)
4
Needs charging.
0
Empty
Operation
Operating time
In continuous
use
5 hours max.
Not in use
(standby)
10 days max.
Y
Handset
:
Base unit
Y
Handset
