2
MbN
: Select the handset you want to cancel.
a
M
OK
N
3
MbN
:
“
Yes
”
a
M
OK
N
4
Proceed with the operation for your unit.
Handset:
M
N
Base unit:
M
N
Increasing the range of the base unit
You can increase the signal range of the base unit
by using a DECT repeater. Please use only the
Panasonic DECT repeater noted on page 4.
Contact your Panasonic dealer for details.
Important:
R
Before registering the repeater to this base unit,
you must turn the repeater mode on.
R
Do not use more than one repeater at a time.
Setting the repeater mode
Handset / Base unit
1
M
N#138
2
MbN
: Select the desired setting.
a
M
OK
N
3
Proceed with the operation for your unit.
Handset:
M
N
Base unit:
M
N
Registering the DECT repeater (KX-A405/
KX-A406) to the base unit
Note:
R
Please use a repeater that has not yet been
registered to another unit. If the repeater is
registered to another unit, deregister it first,
referring to the Installation Guide for the DECT
repeater.
1
Base unit:
Press and hold
M
N
for about 5 seconds.
2
DECT repeater:
Connect the AC adaptor, then wait until the
indicator and indicator light green.
3
Base unit:
To exit the registration mode, press
M
N
.
39
Programming
KX-TGF320UE(en)_0922_ver010.pdf 39
9/22/2022 3:19:48 PM