Panasonic KX-TGE662, Руководство по эксплуатации

Страница: 62 / 108

Remote voice assist
For iPhone
®
and Android
™
smartphone
users
You can use the handset or base unit *1 to
operate the voice recognition feature of the
paired cellular phone (Siri
®
, Google Now
™
, or
S Voice). For example, you can speak into the
handset or base unit
*1 and command your
cellular phone to make a call.
*1 KX-TGE670 series: page 4
Compatible voice recognition features
R Google Now, S Voice (Android 4.0 or later)
R Siri (iOS 8.0 or later)
Important:
R Your cellular phone must support the
Hands Free Profile (HFP) specification.
R In order to use this feature, your cellular
phone's voice recognition feature must be
ready to use.
– iPhone: Make sure Siri is turned on.
– Android: In order to use Google Now,
make sure your cellular phone is
registered to your Google account.
R If you have multiple voice recognition
features available for your cellular phone,
you may need to set the desired voice
recognition feature as the default.
R For Android users: Depending on your
cellular phone, you may need to set Google
Now or S voice as your cellular phone's
default voice recognition feature. For more
information, refer to the operating
instructions of your cellular phone.
Activating remote voice assist
Handset
1
M N
R Go to step 3 in the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make cellular
calls (page 21).
2
MbN : Select the desired cellular phone. a
M SELECT N
3
Wait until “
Voice assist
” is displayed.
R A confirmation tone sounds.
R Speakerphone is turned on
automatically.
R To switch to the receiver, press MZN .
4
Speak your commands to your handset.
R When you have finished using remote
voice assist, press
M OFF N .
Base unit *1
*1 KX-TGE670 series: page 4
1
Press M CELL 1 N or M CELL 2 N
R Skip this step in the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make cellular
calls (page 21).
2
M N
3
Wait until a confirmation tone sounds.
4
Speak your commands to your base unit.
R When you have finished using remote
voice assist, press
M N or MZN .
Note:
R While using this feature, you cannot use
another unit to make a cellular call using
the same cellular line.
R If you receive a call on the landline or on
another cellular line while using this feature,
the interrupt tone sounds.
R If you receive a call on the same cellular
line while using this feature, voice
recognition ends and the unit receives the
incoming call.
R If your cellular phone is connected to the
base unit, you may not be able to use your
cellular phone’s microphone to operate its
voice recognition feature. In this case,
disconnect your cellular phone from the
base unit.
R The compatible voice commands depends
on the cellular phone voice recognition
feature.
62 For assistance, please visit http://shop.panasonic.com/support
Using Bluetooth® Devices
TGE66xUSA(en)_1129_ver034.pdf 62 29/11/2017 3:09:16 PM