Panasonic KX-TGE662, Руководство по эксплуатации

Страница: 21 / 108

Cellular line only mode (If you do
not use the landline)
If you do not use the landline, we recommend
setting the unit to the cellular line only mode.
The default setting is
“ Off ” .
Important:
R If you turn on the “
Cell line only
mode
” , disconnect the telephone line cord
from the base unit. Otherwise the “
Cell
line only mode
” cannot be activated.
1
M MENU N#157
2
To turn on:
MbN : “
On
” a M SELECT N a MbN : “
Yes
”
a M SELECT N
To turn off:
MbN : “
Off
” a M SELECT N
Note:
R Once you set this mode, you can use the
following buttons to make cellular calls:
– for the handset, press
M N or MZN
instead of M CELL N (page 23).
– for the base unit, press MZN without
pressing M CELL 1 N or M CELL 2 N set for
the cellular line selection (page 21,
29). (KX-TGE670 series: page 4)
R Once you set this mode, the following
features cannot be used:
– Landline features (Incoming ringer
volume, incoming ringer tone, dial mode,
flash time, and line mode)
– Answering system (page 65)
Messages cannot be received.
– Voicemail features (page 72)
R After this mode is turned on or off, the base
unit reboots.
– Bluetooth connections from cellular
phones or Bluetooth headset are
disconnected. If the auto connection is
turned on (page 20), the cellular phones
are reconnected.
– will be displayed on the handset
momentarily. The handset can be used
once
is displayed.
When you use the landline again
Before connecting the telephone line to the
base unit, select
“
Off
” in step 2, “Cellular line
only mode (If you do not use the landline)”,
page 21.
Cellular line selection
This feature determines which cellular line is
selected to make cellular calls when:
– you press
M CELL N on the handset.
– you press M N or MZN on the handset
while the cellular line only mode is turned
on.
– you press MZN on the base unit while the
cellular line only mode is turned on.
(KX-TGE670 series: page 4)
The following settings are available:
–
“
Manual
” (handset only: default): You can
select the desired cellular line when making
a call.
– “
Cellphone 1
”
*1
(base unit default):
CELL 1 is selected.
– “
Cellphone 2
” *1 : CELL 2 is selected.
1
For handset: M MENU N#634
For base unit *2 : M MENU N#*634
2
MbN : Select the desired setting. a
M SAVE N a M OFF N
*1 After the Bluetooth device is paired, the
device name is displayed.
*2 KX-TGE670 series: page 4
Storing your area code (for
dialing only a 7-digit phone
number to make a local call)
You need to add your area code when making
cellular calls to a phone number in your area.
Once you store your area code, it is
automatically added to the beginning of the
7-digit phone number when making cellular
calls.
1
M MENU N#633
2
Enter the 3-digit area code.
R To correct a digit, press M CLEAR N .
3
M SAVE N a M OFF N
For assistance, please visit http://shop.panasonic.com/support 21
Link to Cell
TGE66xUSA(en)_1129_ver034.pdf 21 29/11/2017 3:09:15 PM