Panasonic KX-TGE662, Руководство по эксплуатации

Страница: 30 / 108

Adjusting the base unit ringer volume
n
While the base unit is ringing for an
incoming call:
Press MjN or MkN repeatedly to select the
desired volume.
n While the base unit is in standby mode:
Press MjN or MkN repeatedly to select the
desired volume for landline call.
R To turn the ringer off, press and hold MkN
until the unit beeps.
Note:
R You can adjust the ringer volume for
cellular call and landline call by
programming (page 46, 48).
R The ringer volume you set is kept for each
line (landline and cellular lines).
Useful features during a
call
Hold
1
Press M HOLD N during an outside call.
2
To release hold on the cellular line:
Press M CELL 1 N or M CELL 2 N .
R A handset user can take the call:
M CELL N *1 a MbN : Select the
corresponding cellular phone. a
M SELECT N
*1 The call is taken in the following
situations.
– Only 1 cellular phone is paired.
– A specific line is set to make
cellular calls (page 21).
To release hold on the landline:
Press MZN .
R A handset user can take the call by
pressing
M N .
Note:
R While a landline call is on hold, the
SP-PHONE indicator flashes.
R After holding for 10 minutes, the call is
disconnected.
Mute
1
Press M MUTE N during a call.
R The SP-PHONE indicator flashes.
2
To return to the call, press M MUTE N .
Flash for landline calls
M FLASH N allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
Note:
R To change the flash time, see page 51.
For call waiting service users
To use call waiting, you must first subscribe
with your phone service provider.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
1
Press M CALL WAIT N to answer the 2nd
call.
2
To switch between calls, press
M CALL WAIT N .
Note:
R Please contact your phone service provider
for details and availability of this service in
your area.
Temporary tone dialing for
landline calls (for rotary/pulse
service users)
Press * before entering access numbers
which require tone dialing.
Call share
You can join an existing landline call.
To join the conversation, press
MZN when the
handset is on an outside call.
Note:
R You cannot join the conversation while
another unit is on a cellular call.
30 For assistance, please visit http://shop.panasonic.com/support
Making/Answering Calls Using the Base Unit
TGE66xUSA(en)_1129_ver034.pdf 30 29/11/2017 3:09:15 PM