Panasonic KX-TGE262C, Руководство по эксплуатации

Страница: 57 / 80

Key Operation
8 Turn answering system on
M PAUSE N
Pause message
*2
9 or
M STOP N
Stop recording
Stop playback
0 Turn answering system off
*4 *3
Erase currently playing
message
*5 Erase all messages
*6 Reset to a pre-recorded
greeting message
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
*2 To resume playback:
MbN : “
Playback
” a M SELECT N
*3 You can also erase as follows:
M PAUSE N a MbN : “
Erase
” a
M SELECT N a MbN : “
Yes
” a M SELECT N
Calling back (Call Display
subscribers only)
n Using a cellular line:
1
Press M PAUSE N during playback.
2
MbN : “
Call back (Cell)
” a
M SELECT N
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make
cellular calls (page 20).
3
MbN : Select the desired cellular phone.
a M SELECT N
n Using the landline:
1
Press M PAUSE N during playback.
2
MbN : “
Call back
” a M SELECT N
Editing the number before calling back
1
Press M PAUSE N during playback.
2
MbN : “
Edit & Call
” a M SELECT N
3
Press M EDIT N repeatedly until the phone
number is shown in the desired format
(page 50).
a M N
R To call back using a cellular line,
continue from step 2, “Making cellular
calls”, page 21.
Erasing all messages
1
M MENU N#325
2
MbN : “
Yes
” a M SELECT N a M OFF N
Advanced new message
alerting features
Audible message alert
This feature allows the base unit to beep to
inform you of a new message arrival when
new messages are recorded. The base unit
beeps 2 times every minute until you listen to
the messages, if the
“ Base unit beep ”
setting is turned on. The default setting is
“
Off
” .
1
M MENU N#339
2
MbN : Select the desired setting. a
M SAVE N a M OFF N
New message alert by a call
This feature allows you to receive a
notification by phone when new messages are
recorded. The base unit calls a phone number
you specify. You can then operate the
answering system remotely to listen to the
new message.
To use this feature, you must:
– store a phone number to which the unit
makes the call to.
– turn on the new message alert setting.
After you answer the new message alert call,
you can listen to messages from that call
(page 58).
Important:
R A new message alert is stopped 1 minute
after the unit starts to call. The unit will not
retry the call even if the call is not answered.
57
Answering System for Landline
TGE26x_27xC(en)_1224_ver012.pdf 57 2013/12/24 15:43:32