Panasonic KX-TGE262C, Руководство по эксплуатации

Страница: 21 / 80

Making cellular calls
Important:
R The unit can be used to talk on 2 lines at
the same time (for example, 2 cellular lines,
or the landline and 1 cellular line).
R Only 2 Bluetooth devices can be used with
the unit at the same time (for example, 2
cellular lines, or the headset and 1 cellular
line).
R Before making calls, confirm that the
corresponding CELL indicator on the base
unit lights up (page 14).
1
Lift the handset and dial the phone
number.
R To correct a digit, press M CLEAR N .
2
M CELL N
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 20).
Go to step 4.
3
MbN : Select the desired cellular phone. a
M SELECT N
4
When you finish talking, press M OFF N or
place the handset on the base unit or
charger.
Note:
R To switch to the speaker, press MZN .
To switch back to the receiver, press MZN /
M N .
Adjusting the receiver or speaker
volume
Press MjN or MkN repeatedly while talking.
Making a cellular call using the redial
list
The last 5 phone numbers dialed are stored in
the redial list (each 48 digits max.).
1
MEN REDIAL
2
MbN : Select the desired phone number.
3
M CELL N
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 20).
4
MbN : Select the desired cellular phone. a
M SELECT N
Erasing a number in the redial list
n When a cellular phone is paired:
1
MEN REDIAL
2
MbN : Select the desired phone number.
a M MENU N
3
MbN : “
Erase
” a M SELECT N
4
MbN : “
Yes
” a M SELECT N
5
M OFF N
n When a cellular phone is not paired:
1
MEN REDIAL
2
MbN : Select the desired phone number.
a M ERASE N
3
MbN : “
Yes
” a M SELECT N
4
M OFF N
Making landline calls
1
Lift the handset and dial the phone
number.
R To correct a digit, press M CLEAR N .
2
M N
3
When you finish talking, press M OFF N or
place the handset on the base unit or
charger.
Using the speakerphone
1
Dial the phone number and press MZN .
2
When you finish talking, press M OFF N .
Note:
R To switch back to the receiver, press MZN /
M N .
Making a call using the redial list
The last 5 phone numbers dialed are stored in
the redial list (each 48 digits max.).
1
MEN REDIAL
21
Making/Answering Calls Using the Handset
TGE26x_27xC(en)_1224_ver012.pdf 21 2013/12/24 15:43:30