Panasonic KX-TGD320AL Скачать руководство пользователя страница 46

Страница: 46 / 52

Cyrillic character table (

)

Error messages

Display message

Cause/solution

Base no power

No link.
Reconnect
AC adaptor.

No link.

Confirm the base unit’s AC adaptor is connected to the unit
and the power outlet correctly.

The handset has lost communication with the base unit. Move
closer to the base unit and try again.

Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.

The handset’s registration may have been cancelled.
Re-register the handset (page 33).

When

“

No link.

”

is displayed during a power failure, place

a handset on the base unit to supply power to the base unit.

Check
Phone Line

The supplied telephone line cord has not been connected yet
or not connected properly. Check the connections (page 9).

Error

Recording was too short. Try again.

Memory Full

The phonebook memory is full. Erase unwanted entries
(page 20).

The call block list memory is full. Erase unwanted entries
(page 30).

The maximum number of base units (4) is already registered
to the handset. Cancel unused base unit registrations from
the handset (page 34).

Use
rechargeable
battery.

A wrong type of battery such as alkaline or manganese was
inserted. Use only the rechargeable Ni-MH batteries noted on
page 4, 6.

You must first
subscribe
to Caller ID.

You must subscribe to a Caller ID service. Once you receive
caller information after subscribing to a Caller ID service, this
message will not be displayed.

Useful Information

TGD32xAL(en)_1103_ver021.pdf 46

3/11/2015 1:59:54 PM

Содержание KX-TGD320AL





















































Результаты поиска

Содержание KX-TGD320AL

Отзывы:

Похожие инструкции для KX-TGD320AL

Бренды по названию

Популярные бренды

Panasonic KX-TGD320AL, Руководство по эксплуатации

Результаты поиска

Содержание KX-TGD320AL

Отзывы:

Похожие инструкции для KX-TGD320AL

Бренды по названию

Популярные бренды