Panasonic KX-TGD312BX, Руководство по эксплуатации

Страница: 28 / 56

Main menu: “ Ringer Setup ”
*15, *16
Sub-menu 1 Sub-menu 2 Settings Code
Ringer Volume Handset
Off
-6 <6> #160 –
Base Unit
*1, *2
Off
-6 <3> # G 160 –
Ringtone
*5
(Handset)
– <
Ringtone 1
> #161 –
Do Not Disturb
Mode On/Off On
<
Off
>
#238 30
Start/End <23:00/06:00> #237 30
Ring Delay 30 sec.
<
60 sec.
>
90 sec.
120 sec.
No Ringing
#239 30
Select Category Category 1-9 #241 30
First Ring
*2, *6 – <
On
>
Off
#173 –
Main menu: “
Nuisance Call Block
”
*2, *17
Sub-menu 1 Sub-menu 2 Settings Code
Single Number – – #217 30
Range of Numbers – –
Withheld
–
On
< Off >
#240 31
*1 KX-TGD320 series: page 3
*2 If you program these settings using one of the handsets, you do not need to program the
same item using another handset. (KX-TGD312/KX-TGD322)
*3 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*4 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select
“
Caller ID
” . To turn this feature off, select “
Manual
” .
(Caller ID subscribers only)
To use this feature, set the date and time first (page 14).
*5 The preset melodies in this product are used with the following permission:
– “
Ringtone 3
” : © 2014 Copyrights Vision Inc.
– “
Ringtone 4
” - “
Ringtone 40
” : © 2012 Copyrights Vision Inc.
*6 If you do not want the unit to ring before the caller information is received, set to “
Off
” .
(Caller ID subscribers only)
You can only remove the first ring if the unit rings 2 times or more by default, which depends
on your phone service provider.
*7 This setting is available when you have the key finder (KX-TGA20EX). Read the installation
manual for more information on the key finder.
*8 For models with supplied key finders, the display shows “ 1:Finder1 ” .
28
Programming