Voicemail service
Voicemail is an automatic answering service offered by your phone service provider. After you
subscribe to this service, your phone service provider’s voicemail system answers calls for you
when you are unavailable to answer the phone or when your line is busy. Messages are recorded
by your phone service provider, not your telephone.
When you have new messages,
is displayed on the handset if message indication service is
available. Please contact your phone service provider for details of this service.
Important:
R
If
still remains on the display even after you have listened to new messages, turn it off by
pressing and holding
#
for 2 seconds.
R
To use the voicemail service provided by your phone service provider rather than the unit’s
answering system, turn off the answering system (page 39). For details, see page 44.
(KX-TGD320 series: page 3)
Character entry
The dial keys are used to enter characters and numbers. Each dial key has multiple characters
assigned to it. The characters that can be entered depend on the character entry mode
(page 46).
– Press
MFN
or
MEN
to move the cursor left or right.
– Press dial keys to enter characters and numbers.
– Press
M
C
N
to erase the character or number highlighted by the cursor. Press and hold
M
C
N
to
erase all characters or numbers.
– Press
*
(A
a
a) to switch between uppercase and lowercase.
– If you do not press any dial key within 2 seconds after entering a character, the character is
fixed and the cursor moves to the next space.
– When entering another character located on the same dial key, operation will differ depending
on the display language you select.
English
R
Press
MEN
to move the cursor to the next space, then press the appropriate dial key.
Arabic/Persian
R
Press
MFN
to move the cursor to the next space, then press the appropriate dial key.
Character entry modes
The available character entry modes are Alphabet (ABC), Numeric (0-9), Arabic/Persian (
)
and Extended (
). When in these entry modes except Numeric, you can select which
character is entered by pressing a dial key repeatedly.
When the unit displays the character entry screen:
M
R/ECO
N
a
MbN
: Select a character entry mode.
a
M
OK
N
Note:
R
in the following tables represents a single space.
R
When you select Arabic or Persian as the display language, numbers in the character table
are displayed in Arabic or Persian.
46
Useful Information
