![Panasonic KX-TGC410HK Скачать руководство пользователя страница 31](http://html.mh-extra.com/html/panasonic/kx-tgc410hk/kx-tgc410hk_operating-instructions-manual_1509504031.webp)
Problem
Cause/solution
I fully charged the
batteries, but
–
still flashes or
– the operating time
seems to be shorter.
R
Clean the battery ends (
,
) and the charge contacts with
a dry cloth and charge again.
R
It is time to replace the batteries (page 8).
Making/answering calls, intercom
Problem
Cause/solution
is displayed.
R
The handset is too far from the base unit. Move closer.
R
The base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
R
The handset is not registered to the base unit. Register it
(page 32).
R
Activating eco mode reduces the range of the base unit in
standby mode. If required, turn eco mode off (page 12).
Noise is heard, sound cuts
in and out.
R
You are using the handset or base unit in an area with high
electrical interference. Re-position the base unit and use the
handset away from sources of interference.
R
Move closer to the base unit.
R
If you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
The handset does not ring.
R
The ringer volume is turned off. Adjust ringer volume (page 13,
19).
I cannot make a call.
R
The dialling mode may be set incorrectly. Change the setting
(page 12).
R
You dialled a call restricted number (page 23).
R
The key lock feature is turned on. Turn it off (page 15).
Caller ID
Problem
Cause/solution
Caller information is not
displayed.
R
You must subscribe to a Caller ID service. Contact your phone
service provider for details.
R
If your unit is connected to any additional telephone
equipment, remove and plug the unit directly into the wall jack.
R
If you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
R
Other telephone equipment may be interfering with this unit.
Disconnect the other equipment and try again.
Caller information is slow
to display.
R
Depending on your phone service provider, the unit may
display the caller’s information at the 2nd ring or later. Set the
first ring to
“
Off
”
R
Move closer to the base unit.
31
Useful Information
TGC41xHK_(en-hk)_0622_ver001.pdf 31
22/6/2016 4:24:24 PM