2
MbN
:
“
Single Number
”
or
“
Range of
Numbers
”
a
M
OK
N
3
M
N
a
MbN
:
“
Erase All
”
a
M
OK
N
4
MbN
:
“
Yes
”
a
M
OK
N
5
MbN
:
“
Yes
”
a
M
OK
N
a
M
N
Other programming
Changing the handset name
The default handset name is
“
Handset 1
”
to
“
Handset 2
”
. You can customise the name
of each handset (“Bob”, “Kitchen”, etc.). This is
useful when you make intercom calls between
handsets. To display the handset name in
standby mode, turn on the handset name
display feature (page 23).
1
M
N#104
2
Enter the desired name (10 characters
max.).
a
M
OK
N
a
M
N
Displaying the handset name
You can select whether or not the handset
name is displayed in standby mode. The
default setting is
“
Off
”
.
1
M
N#105
2
MbN
: Select the desired setting.
a
M
OK
N
a
M
N
Call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1
M
N#256
2
Enter the base unit PIN (default:
“
0000
”
).
R
If you forget your PIN, contact an
authorised service centre.
3
MbN
: Select the handsets to be restricted.
a
M N
R
“ ” is displayed next to the selected
handset numbers.
R
To cancel the selected handsets:
MbN
: Select the handset.
a
Press
M N
again. “ ” disappears.
4
M
OK
N
5
MbN
: Select a memory location.
a
M
OK
N
6
Enter the phone number or area code to
be restricted (8 digits max.).
a
M
OK
N
a
M
N
Changing the base unit PIN
Important:
R
If you change the PIN (Personal
Identification Number), please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, contact
an authorised service centre.
1
M
N#132
2
Enter the current 4-digit base unit PIN
(default:
“
0000
”
).
3
Enter the new 4-digit base unit PIN.
a
M
OK
N
4
MbN
:
“
Yes
”
a
M
OK
N
a
M
N
Increasing the range of the base
unit
You can increase the signal range of the base
unit by using a DECT repeater. Please use
only the Panasonic DECT repeater noted on
page 3. Contact your Panasonic dealer for
details.
Important:
R
Before registering the repeater to this base
unit, you must turn the repeater mode on.
R
If you want to register 2 or more repeaters
to the base unit, contact an authorised
service centre.
Setting the repeater mode
1
M
N#138
23
Programming
TGC41xHK_(en-hk)_0622_ver001.pdf 23
22/6/2016 4:24:24 PM
