Alarm
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R
Make sure the unit’s date and time setting
is correct (page 13).
1
M
N#720
2
Select an alarm by pressing
1
to
3
.
a
M
OK
N
3
MbN
: Select the desired alarm option.
a
M
OK
N
“
Off
”
Turns alarm off. Go to step 9.
“
Once
”
An alarm sounds once at the set time.
“
Daily
”
An alarm sounds daily at the set time.
Go to step 5.
“
Weekly
”
Alarm sounds weekly at the set time(s).
4
Proceed with the operation according to
your selection in step 3.
n
Once:
Enter the desired date and month.
a
M
OK
N
n
Weekly:
MbN
: Select the desired day of the week
and press
M N
.
a
M
OK
N
5
Set the desired time.
a
M
OK
N
6
Enter a text memo (10 characters max.).
a
M
OK
N
7
MbN
: Select the desired alarm tone.
a
M
OK
N
R
We recommend selecting a different
ringer tone from the one used for
outside calls.
8
MbN
: Select the desired snooze setting.
a
M
OK
N
9
M
OK
N
a
M
N
Note:
R
Press
M
N
to stop the alarm completely.
R
When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
R
Press any dial key or
M
N
to stop the
sound but keep the snooze function
activated.
R
If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.
Nuisance call block
This feature rejects calls from unwanted
callers (Caller ID subscribers only). The
following items are available when storing
phone numbers in the call block list (30 max.).
–
“
Single Number
”
: The unit can reject
calls from specific phone numbers.
–
“
Range of Numbers
”
: The unit can
reject calls that begin with a number stored
in the call block list, such as a toll-free
phone number prefix or certain area codes.
You can also set the unit to reject calls that do
not have a phone number.
When a call is received, the unit does not ring
while the caller is being identified. If the
caller’s phone number matches an entry in the
call block list, the unit emits no sound to the
caller, and disconnects the call.
Important:
R
Rejected calls are logged in the caller list.
Storing unwanted callers
Storing a single phone number
Important:
R
You must include the area code when
storing phone numbers in the call block list.
n
From the caller list:
1
M N
24
Programming
TGC21x_22xNZ_OI_(en-en)_0513_ver.002.pdf 24
2014/05/13 12:05:48
