*6 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*7 The flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*8 Generally, the line mode setting should not be changed. This setting automatically maintains
receiver volume at the proper level depending on the current telephone line condition. Set
the line mode to
“
A
”
if telephone line condition is not good.
Alarm
An alarm sounds at the set time for 3 minutes
once or daily. Alarm can be set for each
handset.
Important:
R
Make sure the unit’s date and time setting
is correct (page 11).
1
M
MENU
N#720
2
MbN
: Select the desired alarm option.
a
M
SELECT
N
“
Off
”
Turns alarm off. Go to step 7.
“
Once
”
An alarm sounds once at the
set time.
“
Daily
”
An alarm sounds daily at the
set time. Go to step 4.
3
Enter the desired month and date.
a
M
OK
N
4
Set the desired time.
5
*
: Select
“
AM
”
or
“
PM
”
.
a
M
OK
N
6
MbN
: Select the desired alarm tone.
a
M
SELECT
N
R
We recommend selecting a different
ringer tone from the one used for
outside calls.
7
M
SELECT
N
a
M
OFF
N
Note:
R
To stop the alarm, press
M
OFF
N
or place
the handset on the base unit or charger.
R
When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
Night mode
Night mode allows you to select a period of
time during which the handset and/or base
unit will not ring for outside calls. This feature
is useful for time periods when you do not
want to be disturbed, for example, while
sleeping. Night mode can be set for each unit.
Important:
R
Make sure the unit’s date and time setting
is correct (page 11).
R
If you have set the alarm, the alarm sounds
even if the night mode is turned on.
Turning night mode on/off
1
M
MENU
N#238
2
MbN
: Select the desired setting.
a
M
SAVE
N
R
If you select
“
Off
”
, press
M
OFF
N
to
exit.
3
Enter the desired hour and minute you
wish to start this feature.
4
*
: Select
“
AM
”
or
“
PM
”
.
a
M
OK
N
5
Enter the desired hour and minute you
wish to end this feature.
6
*
: Select
“
AM
”
or
“
PM
”
.
7
M
SAVE
N
a
M
OFF
N
Changing the start and end time
1
M
MENU
N#237
2
Continue from step 3 “Turning night mode
on/off”, page 21.
For assistance, visit www.panasonic.ca/english/support
21
Programming
