7
Location
• For maximum distance and noise-free operation, place your base unit:
- away from electrical appliances such as TVs, radios, personal computers, or
other phones.
- in a convenient, high, and central location.
Battery installation
Important:
• Use only the supplied rechargeable batteries noted on page 4, 5.
• USE ONLY rechargeable Ni-MH batteries AAA (R03) size.
• Do NOT use Alkaline/Manganese/Ni-Cd batteries.
• Ensure correct polarities (
S
,
T
) when installing the batteries.
• Wipe the battery ends (
S
,
T
) with a dry cloth.
• When installing the batteries, avoid touching the battery ends (
S
,
T
) or the
unit contacts.
Battery charge
Place the handset on the charger for about 8 hours before initial use.
Note:
• The handset display may show
“
Register!
”
when the handset is placed on
the charger if it is not registered to a base unit.
• If you fully charged the batteries, but the operating time seems to be short, wipe
the battery ends (
S
,
T
) and the unit contacts with a dry cloth.
Registering the handset to the KX-TG8070/KX-TG8090 base
unit
Make sure that the batteries are installed correctly.
1
Press and hold
{x}
on the base unit for about 5 seconds until a beep is heard.
• If all registered handsets start ringing, press
{x}
to stop, then repeat this
step.
• After a beep is heard, the rest of this procedure must be completed within
1 minute.
2
{
MENU
}
(right soft key)
i
r
i
{
OK
}
3
{^}
/
{V}
:
“
Registration
”
i
{
OK
}
4
{^}
/
{V}
:
“
Register Handset
”
i
{
OK
}
5
{^}
/
{V}
: Select a base unit number.
i
{
OK
}
• This number is used by the handset as a reference only.
• The registered base unit is indicated by “
@
”.
6
“
Enter PIN
”
is displayed. Enter the base unit PIN (default:
“
0000
”
).
i
{
OK
}
TGA807EX(ex).book Page 7 Tuesday, October 16, 2007 3:34 PM
