Answering calls
1
Press
MZN
when the unit rings.
R
You can also answer the cellular call by
pressing the corresponding cellular line key
(
M
CELL 1
N
to
M
CELL 4
N
).
R
The called landline is automatically
selected. To change the line selection
mode, see page 17.
R
You can also answer the landline call by
pressing
M
LINE 1
N
or
M
LINE 2
N
.
2
Speak into the microphone.
3
When you finish talking, press
MZN
.
Temporary ringer off:
You can turn the ringer off
temporarily by pressing
M N
.
Adjusting the base unit ringer volume
Press
MDN
or
MCN
repeatedly to select the desired
volume while ringing.
Useful features during a call
Hold
1
Press
M
HOLD
N
during an outside call.
R
During hold, the caller will hear music. For
canceling music, see page 42.
2
To release hold on the cellular line:
Press the corresponding cellular line key
(
M
CELL 1
N
to
M
CELL 4
N
).
R
A handset user can take the call:
M
CELL
a
MbN
: Select the corresponding cellular
phone.
a
M
SELECT
N
*1 The call is taken when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 20).
To release hold on the landline:
Press
M
LINE 1
N
or
M
LINE 2
N
.
Note:
R
While a landline call is on hold, the
corresponding line indicators flash.
R
After holding for 10 minutes, the call is
disconnected.
Mute
1
Press
M
MUTE
N
during a call.
2
To return to the call, press
M
MUTE
N
.
Note:
R M
MUTE
N
is a soft key visible on the display
during a call.
Flash for landline calls
M
FLASH
N
allows you to use the special features of
your host PBX such as transferring an extension
call, or accessing optional telephone services.
Note:
R
To change the flash time, see page 42.
For call waiting or Call Waiting Caller
ID service users
To use call waiting or Call Waiting Caller ID, you
must first subscribe with your service provider/
telephone company.
This feature allows you to receive calls while you
are already talking on the phone. If you receive a
call while on the phone, you will hear a call waiting
tone.
If you subscribe to both Caller ID and Call
Waiting with Caller ID services,
the 2nd caller’s
information is displayed after you hear the call
waiting tone on the base unit.
1
Press
M
CALL WAIT
N
to answer the 2nd call.
2
To switch between calls, press
M
CALL WAIT
N
.
Note:
R
Please contact your service provider/telephone
company for details and availability of this
service in your area.
Temporary tone dialing for landline
calls (for rotary/pulse service users)
Press
*
(TONE) before entering access numbers
which require tone dialing.
Call share
You can join an existing outside call.
To select the line that is being used for the call:
– for a cellular line press the corresponding
cellular line key (
M
CELL 1
N
to
M
CELL 4
N
).
28
For assistance, please visit http://shop.panasonic.com/support
Making/Answering Calls Using the Base Unit
TG954x_OI(en)_0722_ver210.pdf 28
2015/07/22 12:24:45
