Making/Answering Calls
17
Auto talk
You can answer calls simply by lifting the
handset off the charger. You do not need
to press
{C}
. To turn this feature on,
see page 26.
Adjusting the handset ringer volume
■
While the handset is ringing for an
incoming call:
Press
{^}
or
{V}
repeatedly to select
the desired volume.
■
Programming the volume
beforehand:
1
1
(middle soft key)
y
16
z
2
{
r
}
: Select the desired volume.
3
M
s
{i
c
}
Temporary handset ringer off
While the handset is ringing for a call,
you can turn the ringer off temporarily by
pressing
L
.
Useful features during
a call
Hold
This feature allows you to put an outside
call on hold.
1
Press
1
during an outside call.
2
{
r
}
:
“
Hold
”
s
M
3
To release hold, press
{C}
.
L
Another handset user can take
the call by pressing
{C}
.
Note:
L
If a call is kept on hold for more than 9
minutes, an alarm tone starts to sound
and the ringer indicator flashes
rapidly. After 1 additional minute on
hold, the call is disconnected.
L
If another phone is connected to the
same line, you can also take the call
by lifting its handset.
Mute
While mute is turned on, you can hear
the other party, but the other party
cannot hear you.
1
Press
1
during conversation.
L
1
flashes.
2
To return to the conversation, press
1
again.
Recall/flash
{
ECO/R
}
allows you to use the special
features of your host PBX such as
transferring an extension call, or
accessing optional telephone services.
Note:
L
To change the recall/flash time, see
page 26.
For call waiting or Call Waiting
Caller ID service users
To use call waiting or Call Waiting Caller
ID, you must first subscribe with your
service provider/telephone company.
This feature allows you to receive calls
while you are already talking on the
phone. If you receive a call while on the
phone, you will hear a call waiting tone.
If you subscribe to both Caller ID and
Call Waiting with Caller ID services
,
the 2nd caller’s information is displayed
after you hear the call waiting tone on the
handset.
1
Press
{
ECO/R
}
to answer the 2nd
call.
2
To switch between calls, press
{
ECO/R
}
.
TG8611FX(e-e).book Page 17 Friday, June 3, 2011 11:23 AM