Getting Started
7
Note when setting up
Note for connections
L
The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L
The AC adaptor should be connected
to a vertically oriented or floor-
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor
may cause it to become disconnected.
Note for battery installation
L
Use the supplied rechargeable
batteries. For replacement, we
recommend using the Panasonic
rechargeable batteries noted on page
4, 10.
L
Wipe the battery ends (
S
,
T
) with a
dry cloth.
L
Avoid touching the battery ends (
S
,
T
) or the unit contacts.
Note for battery charge
L
It is normal for the handset to feel
warm during charging.
L
Clean the charge contacts of the
handset, base unit, and charger with a
soft and dry cloth once a month. Clean
more often if the unit is exposed to
grease, dust, or high humidity.
TG8421E(e).book Page 7 Friday, November 7, 2008 1:45 PM
Turning the power
on/off
Power on
Press
{ih}
for about 1 second.
Power off
Press
{ih}
for about 2 seconds.
Specifications
■
Standard:
DECT (Digital Enhanced Cordless
Telecommunications),
GAP (Generic Access Profile)
■
Frequency range:
1.88 GHz to 1.90 GHz
■
RF transmission power:
Approx. 10 mW (average power per
channel)
■
Power source:
220–240 V AC, 50 Hz
■
Power consumption:
■
Operating conditions:
0
°
C–40
°
C, 20 %–80 % relative air
humidity (dry)
Note:
L
Design and specifications are subject to
change without notice.
L
The illustrations in these instructions may
vary slightly from the actual product.
During a power failure
The unit will not work during a power failure
We recommend connecting a corded-type
telephone (without AC adaptor) to the same
telephone line or to the same telephone line
jack, if you have such a telephone jack in
your house.
Base unit
*1
:
Standby: Approx.
0
.
7
W
Maximum: Approx.
4.0
W
Base unit
*2
:
Standby: Approx.
0
.
9
W
Maximum: Approx.
4.2
W
*1
KX-TG8411
*2
KX-TG8421
