s
Answering System Features
25
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Remote operation
Using a touch-tone phone, you can call your phone
number from outside and access the unit to listen
to messages or change answering system
settings.
Important:
L
In order to operate the answering system
remotely, you must first turn on remote operation
by setting a remote access code. This code
must be entered each time you operate the
answering system remotely.
Turning remote operation on
A 4-digit remote access code must be entered
when operating the answering system remotely.
The remote access code is pre-programmed in
this unit. This code prevents unauthorised parties
from listening to your messages remotely. Remote
access is not possible unless you change the
default remote access code (page 25).
1
{
MENU
}
(right soft key)
i
s
i
{
OK
}
2
{^}
/
{V}
:
“
Settings
”
i
{
OK
}
3
{^}
/
{V}
:
“
Remote Code
”
i
{
OK
}
4
Enter the new 4-digit remote access code.
i
{
OK
}
5
Enter the new 4-digit remote access code
again.
i
{
OK
}
i
{i}
Using the answering system
remotely
When the answering system is on
1
Dial your phone number from a touch-tone
phone.
2
Press
{*}
after you hear the greeting.
L
The greeting will stop.
3
Enter the remote access code.
L
New messages will be played back first.
L
If there are no new messages, all old
messages will be played back after a long
beep.
L
If you enter the wrong remote access code,
a long beep will ring 2 times. If you enter the
wrong one 2 times, it will automatically hang
up.
4
Refer to following table and press the
corresponding keys for operations.
Note:
L
You can hang up at any time.
Remote commands
When the answering system is off
1
Dial your phone number from a touch-tone
phone.
2
Let the phone ring 20 times.
3
Enter your remote access code within 10
seconds.
L
You can hang up, or enter your remote
access code again and begin remote
operation.
L
If you enter the wrong remote access code,
a long beep will ring 2 times. If you enter the
wrong one 2 times, it will automatically hang
up.
Key
Operation
{
4
}
Repeat message
(during playback)
*1
{
5
}
Start and stop message playback
{
6
}
Skip message
(during playback)
{
8
}
Turn answering system on
{
0
}
Turn answering system off
{
#
}
Erase currently playing message
*1 Press again quickly to play the previous
message.
TG8070-8090E(e).book Page 25 Monday, June 11, 2007 8:12 PM
