Panasonic KX-TG7841BX, Руководство по эксплуатации

Страница: 42 / 68

(page 27). When a call is received from a
caller assigned to a group, the ringer tone you
selected for that group rings instead of the
called line’s ringer tone (page 15, 33, 34) after
caller information is displayed. If you select
“
Current ringer
” (default), the unit uses
the called line’s ringer tone you selected on
page 34 when calls from this group are
received.
R The ringer may be changed after the 2nd
ring.
Handset
1
MFN a M MENU N
2
MbN : “
Group
” a M SELECT N
3
MbN : Select the desired group. a
M SELECT N
4
MbN : Select the desired ringer tone. a
M SAVE N
5
M OFF N
Caller list
Important:
R Only 1 person can access the caller list at a
time.
R Make sure the unit’s date and time setting
is correct (page 13).
Viewing the caller list and calling
back
n Using a cellular line
Handset
1
MCN CID
2
Press MCN to search from the most recent
call, or MDN to search from the oldest call.
3
To call back, press M SELECT N .
To exit, press M OFF N .
4
M CELL N
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 17).
5
MbN : Select the desired cellular phone. a
M SELECT N
Base unit
1
M CID N
2
Press MCN to search from the most recent
call, or MDN to search from the oldest call.
3
To call back, press M CELL 1 N or M CELL
2 N .
To exit, press M EXIT N .
n Using the landline
Handset / Base unit
1
Proceed with the operation for your unit.
Handset: MCN CID
Base unit: M CID N
2
Press MCN to search from the most recent
call, or MDN to search from the oldest call.
3
Proceed with the operation for your unit.
Handset:
– To call back, press M N .
– To exit, press M OFF N .
Base unit:
– To call back, press MZN .
– To exit, press M EXIT N .
Note for handset and base unit:
R If the entry has already been viewed or
answered, “
” is displayed, even if it was
viewed or answered using another unit.
R In step 2 for handset or step 2 for base unit,
if is displayed, not all of the information is
shown. To see the remaining information:
Handset:
Press MEN .
To return to the previous screen, press MFN .
Base unit:
Press M N .
To return to the previous screen, press
M N .
R or indicates the caller information
was received from the cellular line.
R If you do not want to dial the area code
when making landline calls from the caller
list, you can store the area code which you
want the unit to delete automatically
(page 43).
42
Caller ID Service
TG7841BX_UE(en)_0528_ver011.pdf 42 2013/05/28 18:56:48