68
KX-TG254SK/KX-TGA470S
13.1.4.
How to Install the IC
1. Place the solder a little on the land where the radiation GND pad on IC bottom is to be attached.
2. Place the solder a little on the land where IC pins are to be attached, then place the IC.
Note:
• When placing the IC, the positioning should be done very carefully.
3. Heat the IC with a hot air desoldering tool through the P.C.Board until the solder on IC bottom is melted.
Note:
• Be sure to place it precisely, controlling the air volume of the hot air desoldering tool.
4. After soldering, confirm there are no short and open circuits with visual inspection.
Solder
Soldering Iron
P.C.Board
Land
IC
Solder
Soldering Iron
P.C.Board
Land
P.C.Board
IC
Hot Air Desoldering Tool
Содержание KX-TG7733M
Страница 66: ...54 KX TG254SK KX TGA470S Ԛ Attach the LCD and fix by hook A two points A ...
Страница 85: ...73 KX TG254SK KX TGA470S Memo ...
Страница 96: ...84 KX TG254SK KX TGA470S Memo ...
Страница 103: ...91 KX TG254SK KX TGA470S 16 4 Accessories A1 A2 A3 A4 A5 A6 ...