background image

Important Information

5

For your safety

To prevent severe injury and loss of life/
property, read this section carefully before 
using the product to ensure proper and safe 
operation of your product.

WARNING

Power connection

L

Use only the power source marked on the 
product.

L

Do not overload power outlets and 
extension cords. This can result in the risk 
of fire or electric shock.

L

Completely insert the AC adaptor/power 
plug into the power outlet. Failure to do so 
may cause electric shock and/or excessive 
heat resulting in a fire.

L

Regularly remove any dust, etc. from the 
AC adaptor/power plug by pulling it from the 
power outlet, then wiping with a dry cloth. 
Accumulated dust may cause an insulation 
defect from moisture, etc. resulting in a fire.

L

Unplug the product from power outlets if it 
emits smoke, an abnormal smell, or makes 
an unusual noise. These conditions can 
cause fire or electric shock. Confirm that 
smoke has stopped emitting and contact an 
authorised service centre.

L

Unplug from power outlets and never touch 
the inside of the product if its casing has 
been broken open.

L

Never touch the plug with wet hands. 
Danger of electric shock exists.

Installation

L

To prevent the risk of fire or electrical shock, 
do not expose the product to rain or any 
type of moisture.

L

Do not place or use this product near 
automatically controlled devices such as 
automatic doors and fire alarms. Radio 
waves emitted from this product may cause 
such devices to malfunction resulting in an 
accident.

L

Do not allow the AC adaptor or telephone 
line cord to be excessively pulled, bent or 
placed under heavy objects.

Operating safeguards

L

Unplug the product from power outlets 
before cleaning. Do not use liquid or 
aerosol cleaners.

L

Do not disassemble the product.

L

Do not spill liquids (detergents, cleansers, 
etc.) onto the telephone line cord plug, or 
allow it to become wet at all. This may 
cause a fire. If the telephone line cord plug 
becomes wet, immediately pull it from the 
telephone wall jack, and do not use.

Medical

L

Consult the manufacturer of any personal 
medical devices, such as pacemakers or 
hearing aids, to determine if they are 
adequately shielded from external RF 
(radio frequency) energy. (The product 
operates in the frequency range of 1.88 
GHz to 1.90 GHz, and the RF transmission 
power is 250 mW (max.).)

L

Do not use the product in health care 
facilities if any regulations posted in the 
area instruct you not to do so. Hospitals or 
health care facilities may be using 
equipment that could be sensitive to 
external RF energy.

CAUTION

Installation and location

L

Never install telephone wiring during an 
electrical storm.

L

Never install telephone line jacks in wet 
locations unless the jack is specifically 
designed for wet locations.

L

Never touch uninsulated telephone wires or 
terminals unless the telephone line has 
been disconnected at the network interface.

L

Use caution when installing or modifying 
telephone lines.

L

The AC adaptor is used as the main 
disconnect device. Ensure that the AC 
outlet is installed near the product and is 
easily accessible.

L

This product is unable to make calls when:
– the handset batteries need recharging or 

have failed.

– there is a power failure.
– the key lock feature is turned on.

TG7511_7521BX(e).book  Page 5  Tuesday, June 15, 2010  2:10 PM

Содержание KX-TG7521BX

























































Отзывы: