Multi-unit Operation
31
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
flashing. If keytones are turned on
(page 19), a confirmation tone will be
heard.
Cancelling a handset
A maximum of 6 handsets can be registered
to the base unit. A handset can cancel its
own registration (or the registration of
another handset) that is stored in the base
unit. This will allow the base unit to “forget”
the handset.
1
{j
/OK
}
i
“
Base Unit Setup
”
i
{
>
}
2
Enter
“
335
”
.
3
“
Cancel Handset
”
i
{
>
}
L
The numbers of all handsets
registered to the base unit are
displayed.
4
Select the handset(s) you want to
cancel, by pressing the desired handset
number.
L
The selected handset number(s) will
flash.
L
To cancel a selected handset number,
press the number again. The number
will stop flashing.
5
{j
/OK
}
i
“
Yes
”
i
{
>
}
L
A long beep will sound as each
handset number disappears.
L
The handset does not beep when
cancelling its own registration.
6
{ih}
Increasing the range of the base
unit
You can increase the signal range of the
base unit by using a DECT repeater. Please
use only the Panasonic DECT repeater
noted on page 5. Consult your Panasonic
dealer for details.
Important:
L
Before registering the repeater to this
base unit, you must turn the repeater
mode on.
L
Do not use more than one repeater at a
time.
Setting the repeater mode
1
{j
/OK
}
i
“
Base Unit Setup
”
i
{
>
}
2
“
Other Options
”
i
{
>
}
3
“
Repeater Mode
”
i
{
>
}
4
“
On
”
or
“
Off
”
i
{
>
}
i
{ih}
Note:
L
After turning repeater mode on or off,
w
will flash on the handset momentarily. This
is normal. The handset can be used once
w
stops flashing.
Intercom between
handsets
Intercom calls can be made between
handsets.
Example:
When handset 1 calls handset 2
1
Handset 1:
{
INT
}
i
Press
{
2
}
(desired handset
number).
2
Handset 2:
Press
{C}
/
{s}
to answer.
3
When finished talking, press
{ih}
.
Transferring calls
between handsets
Outside calls can be transferred between 2
people.
TG7160-7180E(e).book Page 31 Thursday, July 27, 2006 12:45 PM