Panasonic KX-TG6721AL, Руководство по эксплуатации, Страница: 29 / 52

4
MbN : Select the desired setting. a 2
times
5
M N
Incoming call barring (Caller ID
subscribers only)
This feature allows the unit to reject calls from
specified phone numbers that you do not want
to answer such as junk calls.
When a call is received, the unit does not ring
while the caller is being identified. If the phone
number matches an entry in the call barred
list, the unit sends out a busy tone to the
caller, and then disconnects the call.
Important:
R When the unit receives a call from a
number that is stored in the call barred list,
the call is logged in the caller list
(page 33) with
after the call is
disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in the
call barred list.
Important:
R You must store the phone number with an
area code in the call barred list.
n From the caller list:
1
MFN ( )
2
MbN : Select the entry to be barred. a
3
MbN : “
Caller Barred
” a
4
MbN : “
Yes
” a a M N
n By entering phone numbers:
1
#217 a
2
Enter the phone number (24 digits
max.).
a
R To erase a digit, press .
3
M N
Viewing/editing/erasing bar call
numbers
1
#217
2
MbN : Select the desired entry.
R To exit, press M N .
3
To edit a number:
a Edit the phone number. a
a M N
To erase a number:
a MbN : “
Yes
” a a M N
Note:
R When editing, press the desired dial key to
add,
to erase.
Storing an area code to be
deleted automatically
In some situations, phone numbers stored
automatically in the caller list (page 33) will
include area codes. If you do not want to dial
the area code when making calls from the
caller list, you can store the area code which
you want the unit to delete automatically.
Example: You have stored the area code
“123”. If you make a call from the caller list to
the phone number “123-456-7890”, the unit
dials “456-7890”.
1
#255
2
Enter an area code (5 digits max.). a
a M N
Setting call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1
#256
2
Enter the base unit PIN (default: “
0000
” ).
R If you forget your PIN, contact an
authorised service centre.
29
Programming
TG672xAL(en)_0125_ver011.pdf 29 2012/01/25 9:16:18