To turn key lock on, press
for about 3
seconds.
R
is displayed.
R
To turn key lock off, press
for about 3
seconds.
Note:
R
Calls to emergency numbers cannot be
made until key lock is turned off.
Power back-up operation
When a power failure occurs, the charged
handset temporarily supplies power to the
base unit (power back-up mode). This allows
you to make and receive calls using a handset
during a power failure. The base unit will not
perform any other functions. You can program
“
Power Failure
”
and the default setting is
“
Auto
”
(page 26).
Important:
R
If a handset is not placed on the base unit
when a power failure occurs,
“
Base no
power Press
e
”
or
“
Press
e
”
is
displayed. After pressing
M
N
on the
handset, place it on the base unit to start
power back-up mode.
R
Power back-up mode will not work if the
battery level of the power supplying
handset is
/
.
R
Do not lift the power supplying handset
from the base unit during power back-up
mode.
R
Do not touch the handset’s charge contacts
during power back-up mode.
R
If the battery level is low, the unit will not
work sufficiently during power back-up
mode. In addition, in case handset battery
power runs out, we recommend connecting
a corded-type telephone (without AC
adaptor) to the same telephone line or to
the same telephone line socket using a
telephone double adaptor.
R
Calls cannot be made during a power
failure until key lock is turned off (page 18).
R
If
“
Please wait for 1 minute.
”
is
displayed, please do not operate the unit
until the message disappears.
Panasonic Ni-MH battery
performance (supplied batteries)
during power back-up mode
When the batteries are fully charged,
operating time of the handset in power
back-up mode varies depending on usage.
– Continuous use of the handset in power
back-up mode: 2 hours max.
– Continuous use of the handset other than a
handset in power back-up mode: 3 hours
max.
– Not in use in power back-up mode: 3 hours
max.
Note:
R
Actual battery performance depends on
usage and ambient environment.
Making calls during a power
failure
n
When only 1 handset is registered:
1
Lift the handset and dial the phone
number.
2
Within 1 minute, place the handset on
the base unit.
R
Wait until speakerphone is turned
on automatically and the call is
made.
3
When the other party answers the
call, keep the handset on the base
unit and talk using the speakerphone.
4
When you finish talking, press
M
N
.
Note:
R
In step 2, if you do not place the handset on
the base unit within 1 minute, the power
back-up mode turns off. In this case, press
M
N
on the handset and dial the phone
number. Then try again from step 2.
n
When 2 or more handsets are registered:
You should leave one handset on the base
unit for supplying power, and use another
handset for making calls. For the
operation, please see “Making calls”,
page 17.
19
Making/Answering Calls
TG672xAL(en)_0125_ver011.pdf 19
2012/01/25 9:16:16