Panasonic KX-TG6700B - Cordless Phone - Operation, Руководство по обслуживанию

Страница: 90 / 134

90
KX-TG6700B/KX-TG6702B/KX-TGA670B
13 Schematic Diagram
13.1. For Schematic Diagram
13.1.1. Base Unit (Schematic Diagram (Base Unit_Main))
Notes:
1. DC voltage measurements are taken with voltmeter from the negative voltage line.
2. The schematic diagrams may be modified at any time with the development of new technology.
13.1.1.1. Microphone Input Level (Base Unit)
Adjust the signal level to -47 dBm (11 mVp-p) with no load.
Then input the signal to MIP and MIN of the base unit through PQLT3E3A-M.
13.1.1.2. Acoustic Testing Mode
13.1.2. Handset (Schematic Diagram (Handset_Main))
Notes:
1. DC voltage measurements are taken with an oscilloscope or a tester with a ground.
2. The schematic diagrams may be modified at any time with the development of new technology.
13.1.2.1. Microphone Input Level (Handset)
Handset Mode
Adjust the signal level to -40 dBm with 600 ohm load.
Then input the signal to MICP and MICN of the handset through the 47
µ
F capacitors.
Headset Mode
Adjust the signal level to -44 dBm with 600 ohm load.
Then input the signal to MICP and MICN of the handset through the 47
µ
F capacitor.
13.1.3. Charger Unit (Schematic Diagram (Charger Unit))
Notes:
1. DC voltage measurements are taken with voltmeter from the negative voltage line.
2. The schematic diagram may be modified at any time with the development of new technology.