Making/Answering Calls
23
Changing the ringer tone
You can change the base unit ringer tone
heard when an outside call is received.
There are 4 tones and 4 melodies.
1
Press
{
LINE SELECT
}
repeatedly to
select the desired line when in standby
mode.
L
You cannot set the ringer tone for
both lines at the same time.
2
Within 10 seconds, press
{
<
}
or
{
>
}
repeatedly to select the desired ringer
tone.
L
To stop ringing, press
{
STOP
}
.
Note:
L
If you select one of the melody ringer
patterns, the ringer continues to sound
for several seconds if:
– the caller hangs up before you answer
the call.
– another person answers the call using
another phone connected on the
same line.
Useful features during a
call
HOLD button
This feature allows you to put an outside
call on hold.
1
Press
{
HOLD
}
during an outside call.
L
To transfer the call to the base unit or
another handset, continue from step
2, “Transferring calls”, page 49.
2
Press
{
HOLD
}
again.
L
To release the hold, press
{
LINE1
}
or
{
LINE2
}
that is flashing on the
handset.
Press
{
HOLD
}
during an outside call.
L
To release the hold, press
{
LINE1
}
or
{
LINE2
}
that is flashing on the base unit.
Note for handset and base unit:
L
If another phone is connected to the
same line (page 11), you can also take
the call by lifting its handset.
L
If a call is kept on hold for more than 6
minutes, an alarm tone starts to sound.
After 4 additional minutes on hold, the
call is disconnected.
Handset
Base unit
TG6700AL.book Page 23 Tuesday, June 27, 2006 2:08 PM
