Answering System
38
Answering system
settings
Number of rings before the unit
answers a call
You can change the number of times the
phone rings
“
Csengetések száma
”
before
the unit answers a call. You can select 2 to 7
rings, or
“
Automata
”
.
The default setting is
“
4 csengetés
”
.
“
Automata
”
: The unit’s answering system
answers at the end of the 2nd ring when new
messages have been recorded, or at the end
of the 5th ring when there are no new
messages. If you call your phone from
outside to listen to new messages (37. oldal),
you know that there are no new messages
when the phone rings for the 3rd time. You
can then hang up without being charged for
the call.
1
8
i
{
#
}{
2
}{
1
}{
1
}
2
{V}
/
{^}
: Select the desired setting.
i
M
i
{i
c
}
For voice mail service subscribers
To receive voice mail and use answering
system properly, please note the following:
L
To use the voice mail service (39. oldal)
provided by your service provider/
telephone company rather than the unit’s
answering system, turn off the answering
system (34. oldal).
L
To use this unit’s answering system rather
than the voice mail service provided by
your service provider/telephone company,
please contact your service provider/
telephone company to deactivate your
voice mail service.
If your service provider/telephone
company cannot do this:
– Set this unit’s
“
Csengetések száma
”
setting so that this unit’s answering
system answers calls before the voice
mail service of your service
provider/telephone company does. It is
necessary to check the number of rings
required to activate the voice mail
service provided by your service
provider/telephone company before
changing this setting.
– Change the number of rings of the voice
mail service so that the answering
system can answer the call first. To do
so, contact your service
provider/telephone company.
Caller’s recording time
You can change the maximum message
recording time allowed for each caller. The
default setting is
“
3 perc
”
.
1
8
i
{
#
}{
3
}{
0
}{
5
}
2
{V}
/
{^}
: Select the desired setting.
i
M
i
{i
c
}
Selecting “Greeting Only”
You can select
“
Csak üdv.
”
which sets the
unit to announce a greeting message to
callers but not record messages.
Select
“
Csak üdv.
”
in step 2 on „Caller’s
recording time”, 38. oldal.
Megjegyzés:
L
When you select
“
Csak üdv.
”
:
– If you do not record your own message,
the unit will play the pre-recorded
greeting-only message asking callers to
call again later.
– If you use your own message, record
the greeting-only message asking
callers to call again later (35. oldal).
TG6511-6521HG(e-hg).book Page 38 Friday, January 22, 2010 2:49 PM
