Panasonic KX-TG2750S Скачать руководство пользователя

Страница: 63 / 72

For assistance, please call: 1-800-211-PANA(7262)

Useful Inf

ormation

Important Safety Instructions

CAUTION:

To reduce the risk of fire or injury to persons, read and follow these instructions.

1. Use only the battery(ies) specified.
2. Do not dispose of the battery(ies) in a fire. They may explode. Check with local

waste management codes for special disposal instructions.

3. Do not open or mutilate the battery(ies). Released electrolyte is corrosive and

may cause burns or injury to the eyes or skin. The electrolyte may be toxic if
swallowed.

4. Exercise care in handling batteries in order not to short the battery to

conductive materials such as rings, bracelets, and keys. The battery and/or
conductor may overheat and cause burns.

5. Charge the battery(ies) provided with or identified for use with this product only

in accordance with the instructions and limitations specified in this manual.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR ANY TYPE OF MOISTURE.

• The AC adaptor is used as the main disconnect device, ensure that the AC outlet

is located/installed near the unit and is easily accessible.

Содержание KX-TG2750S









































































Результаты поиска

Содержание KX-TG2750S

Отзывы:

Похожие инструкции для KX-TG2750S

Бренды по названию

Популярные бренды

Panasonic KX-TG2750S, Руководство по эксплуатации

Результаты поиска

Содержание KX-TG2750S

Отзывы:

Похожие инструкции для KX-TG2750S

Бренды по названию

Популярные бренды