Main menu
Sub-menu 1
Sub-menu 2
Base Unit Setup
*2
First Ring
*7
<
On
>
–
–
Dial Mode
<
Tone
>
–
11
Recall/Flash
*8
<
100 msec.
>
–
14
Privacy Mode
*1,
*9
<
Off
>
–
–
Base Unit PIN
–
29
Repeater Mode
<
Off
>
–
19
*1 KX-TG2713
*2 If you program these settings using one of the handsets, you do not need to program the
same item using another handset. (KX-TG2713)
*3 The ringer tone may continue to play for several seconds even if the caller has already hung
up. You may either hear a dial tone or no one on the line when you answer the call.
*4 The preset melodies in this product are used with permission of © 2011 Copyrights Vision
Inc.
*5 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any
keys, including confirmation tones and error tones.
*6 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*7 If you do not want the unit to ring before the caller information is received, set to
“
Off
”
.
(Caller ID subscribers only)
You can only remove the first ring if the unit rings two times or more by default, which
depends on your service provider/telephone company.
*8 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*9 To prevent other users from joining your conversations with outside callers, turn this feature
on.
Special programming
Alarm
An alarm sounds at the set time for 3 minutes
once or daily. Alarm can be set for each
handset.
Important:
R
Set the date and time beforehand
(page 11).
1
M
N
2
MbN
:
“
Handset Setup
”
a
M
N
3
MbN
:
“
Alarm
”
a
M
N
4
MbN
: Select the desired alarm option.
a
M
N
“
Off
”
Turns alarm off. Go to step 8.
“
Once
”
An alarm sounds once at the set time.
18
Programming
TG2711_13SA(en)_0927_ver001.pdf 18
2012/09/27 12:18:21