Service provider access (
{
IP
}
button)
31
Service provider access
If you subscribe to the telephone services
of more than one telephone service
provider, normally you need to dial the
desired provider’s access number before
dialing a phone number in order to use that
provider’s service.
You can store a service provider’s access
number and assign it to the unit’s
{
IP
}
button. This allows you to easily make
calls using that provider’s service because
you do not need to manually dial the
provider’s access number.
Important:
L
To use the service of more than one
telephone service provider, you must
first subscribe to the desired provider’s
service. Consult the telephone service
provider for details.
Example:
L
If you assign the provider access
number “098” to the
{
IP
}
button, when
you dial “12345” and press
{
IP
}
(instead
of
{C}
) to make the call, the unit dials
“09812345”.
Assigning a service provider access
number to the
{
IP
}
button
1
{
菜单
}
i
{#}
2
Enter the IP access number (max. 48
digits).
3
{
决定
}
i
{
关闭
}
L
The
{
IP
}
is shown on the display.
Note:
L
When storing your IP access number
and the desired phone number, press
{
暂停
}
to add pauses (page 19) between
the access number and the phone
number as necessary. Consult your
telephone service provider for the
required pause time.
L
IP access number can be stored for
each handset.
Changing/erasing the access number
1
{
菜单
}
i
{#}
2
Press
{
<
}
or
{
>
}
to move the cursor to
the number you want to erase, then
press
{
清除
}
.
L
Press and hold
{
清除
}
to erase all
numbers.
3
Enter the appropriate number.
4
{
决定
}
i
{
关闭
}
TG2620CN_2622CN.book Page 31 Friday, December 15, 2006 9:25 AM
