Useful Information
18
Battery recharge
Making/answering calls, intercom
Problem
Cause/solution
The RECHARGE
indicator flashes or the
handset beeps
intermittently.
L
Fully charge the battery (page 8).
I charged the battery fully,
but the RECHARGE
indicator continues to
flash.
L
Clean the charge contacts and charge again (page 8).
L
The battery may need to be replaced with a new one
(page 8).
Problem
Cause/solution
Static is heard, sound
cuts in and out.
Interference from other
electrical units.
L
Move the handset and the base unit away from other
electrical appliances.
L
Move closer to the base unit.
L
Raise the base unit antenna.
L
If your unit is connected to a telephone line with DSL
service, we recommend connecting a noise filter
between the base unit and the telephone line jack.
Contact your DSL provider for details.
The handset does not
ring.
L
The ringer volume is turned off. Adjust it (page 15).
I cannot make a call.
L
The dialing mode may be set incorrectly. Change the
setting (page 16).
I cannot redial by
pressing
{
REDIAL
}
.
L
If the last number dialed was more than 48 digits long,
the number will not be redialed correctly. Dial the
number manually.
I cannot make long
distance calls.
L
Make sure that you have long distance service.
I cannot page the
handset.
L
The called handset is too far from the base unit.
L
The called handset is in use. Try again later.
TG2611C(e).book Page 18 Wednesday, January 25, 2006 4:45 PM
