Panasonic KX-TG2553CS Скачать руководство пользователя

Страница: 58 / 60

Safety Instructions

Take special care to follow the safety suggestions listed below.

Safety

1) The unit should be connected to a power supply only of the type

described in the operating instructions or as marked on the unit.

2) When left unused for a long period of time, the base unit should be

unplugged from the household AC outlet.

Installations
Environment

1) Do not use this unit near water— for example, near a bathtub,

washbowl, sink, etc. Damp basements should also be avoided.

2) The unit should be kept away from heat sources such as radiators,

kitchen range, etc. It also should not be placed in rooms where the
temperature is less than 5°C (41°F) or greater than 40°C (104°F).

3) The AC adaptor is used as the main disconnect device, ensure that

the AC outlet is located/installed near the unit and is easily accessible.

Placement

1) Do not place heavy objects on top of this unit.
2) Care should be taken so that objects do not fall onto, and liquids are

not spilled into, the unit. Do not subject this unit to excessive smoke,
dust, mechanical vibration or shock.

3) Place the unit on a flat surface.

For best performance

1) If noise prevents the conversation from being understood at the

handset, approach the base unit to lessen the noise.

2) The handset should be used at the HIGH volume setting when the

reception tone is difficult to hear.

3) The handset should be fully recharged on the base unit when

“

Recharge battery

” is displayed and/or “

” flashes.

4) The handset antenna should not be touched during use because of its

high sensitivity.

5) The maximum calling distance may be shortened when the unit is

used in the following places: Near obstacles such as hills, tunnels,
undergrounds, near metal objects such as wire fences, etc.

Содержание KX-TG2553CS





























































Результаты поиска

Содержание KX-TG2553CS

Отзывы:

Похожие инструкции для KX-TG2553CS

Бренды по названию

Популярные бренды

Panasonic KX-TG2553CS, Руководство по эксплуатации

Результаты поиска

Содержание KX-TG2553CS

Отзывы:

Похожие инструкции для KX-TG2553CS

Бренды по названию

Популярные бренды