Useful Information
36
Liquid damage
Caution:
L
To avoid permanent damage, do not use a microwave oven to speed up the drying process.
Registering a handset to the base unit
1
Handset:
{j
/OK
}
2
{V}
/
{^}
:
“
Kézibesz. beáll.
”
i
{j
/OK
}
3
{V}
/
{^}
:
“
Kézib. regiszt.
”
i
{j
/OK
}
4
Base unit:
Press and hold
{x}
for about 5 seconds. (No registration tone)
L
If all registered handsets start ringing, press the same button to stop. Then repeat this
step. (KX-TG2512)
L
The next step must be completed within 90 seconds.
5
Handset:
Wait until
“
Bázis PIN beír.
”
is displayed.
i
Enter the base unit PIN (default:
“
0000
”
).
i
{j
/OK
}
L
If you forget your PIN, contact an authorised service centre.
L
When the handset has been registered successfully,
w
stops flashing.
Megjegyzés:
L
If the registration fails, try to deregister the handset and then re-register it again.
Press
{j
/OK
}
i
{V}
/
{^}
:
“
Bázisbeállítás
”
i
{j
/OK
}
i
{
3
}{
3
}{
5
}
i
{j
/OK
}
i
Select the handset(s) you want to cancel, by pressing the desired handset
number.
i
{j
/OK
}
i
{V}
/
{^}
:
“
IGEN
”
i
{j
/OK
}
i
Repeat from step 1.
I cannot operate the
answering system
remotely.
L
The remote access code is not set. Set the remote access code
(25. oldal).
L
You are entering the wrong remote access code. If you have
forgotten your remote access code, enter the remote access
code setting to check your current code (25. oldal).
L
Press each key firmly.
L
The answering system is turned off. Turn it on (26. oldal).
Problem
Cause/solution
Liquid or other form of moisture
has entered the handset/base unit.
L
Disconnect the AC adaptor and telephone line cord
from the base unit. Remove the batteries from the
handset and leave to dry for at least 3 days. After
the handset/base unit are completely dry,
reconnect the AC adaptor and telephone line cord.
Insert the batteries and charge fully before use. If
the unit does not work properly, contact an
authorised service centre.
Problem
Cause/solution
TG2511_2521HG(e-hg).book Page 36 Thursday, January 21, 2010 3:16 PM
