For assistance, please call: 1-800-211-PANA(7262)
33
Making Calls
T
elephone System
• To switch to the handset while using the base unit speakerphone:
— If the handset is off the base unit, press
[
C
]
or
[
s
]
on the handset, then press
[SP-PHONE]
on the base unit.
— If the handset is on the base unit, just lift up the handset.
• If the Base Unit Talking Keypad is turned off (p. 21), the base unit will not
announce the entered number.
To adjust the speaker volume during a conversation
To increase volume, press
VOLUME [
>
]
.
To decrease volume, press
VOLUME [
<
]
.
• There are 8 volume levels. If you try to increase/decrease volume when it is at the
maximum/minimum level, the base unit will beep 3 times.
To redial the last number dialed
Press
[SP-PHONE]
, then press
[REDIAL]
.
• “
Redial
” is announced.
• If the Base Unit Talking Keypad is turned off (p. 21), the base unit will not
announce.
To put a call on hold
Press
[HOLD/CONF]
during a conversation.
• The SP-PHONE indicator flashes.
To return to the call,
press
[SP-PHONE]
.
• The handset user can also take the call by pressing
[
C
]
or
[
s
]
.
• If another phone is connected on the same line (p. 9), you can also take the call
by lifting its handset.
• If a call is kept on hold for 6 minutes, an alarm tone will start to sound. After 4
additional minutes on hold, the call will be disconnected.
The base unit will not make announcements, when:
• the Base Unit Talking Keypad is turned off
• the Answering System is in use
• the handset is announcing.
Hands-free Digital Duplex Speakerphone
For best performance, please note the following:
• Talk alternately with the other party in a quiet room.
• If you or the other party has difficulty hearing the conversation, press
VOLUME
[
<
]
to decrease the speaker volume.
PQQX14302ZB.book 33 ページ ２００４年７月３０日 金曜日 午後４時５２分
