Locator/Intercom
T
e
lephone System
For assistance, please call: 1-800-211-PANA(7262)
53
From
Using this feature, you can also locate a misplaced handset.
Answering Intercom Calls
When a handset is paged, it rings and the Ringer/Message Alert indicator flashes
rapidly.
When the base unit is being paged, it rings.
1
Press
[LOCATOR/INTERCOM]
.
• The SP-PHONE indicator lights.
• The handset will ring for 5 minutes.
• To stop paging, press
[SP-PHONE]
or
[LOCATOR/INTERCOM]
.
2
When the paged party answers, talk into the
MIC
.
3
To disconnect the intercom, press
[SP-PHONE]
or
[LOCATOR/
INTERCOM]
.
• The indicator light goes out.
During an intercom call:
• If you have difficulty hearing while using the handset speakerphone and base
unit speaker, decrease the speaker volume by pressing
VOLUME
[
<
]
on the
base unit or
[
d
]
on the handset.
• If an incoming call is being received, you will hear two tones (incoming call
tone, page 59) and “
” will flash rapidly on the base unit.
To answer the call;
— if using the handset, press
[OFF]
, then
[
C
]
or
[
s
]
.
— if using the base unit, press
[SP-PHONE]
twice
.
1
Press
[
C
]
,
[
s
]
or
[HOLD/INTERCOM]
.
• You can also answer a call by pressing any button
except
[
d
]
,
[
B
]
or
[OFF]
.
2
To disconnect the intercom, press
[OFF]
.
1
Press
[SP-PHONE]
or
[LOCATOR/INTERCOM]
.
2
To disconnect the intercom, press
[SP-PHONE]
or
[LOCATOR/
INTERCOM]
.
• When the ringer volume is turned off (p. 17, 18), the handset and the base unit
will ring at the low level for intercom calls.
• You cannot change the ringer tone for intercom calls.
Base Unit
LINE
IN USE
Handset
Call from Base
Base Unit
PQQX14302ZB.book 53 ページ 2004年7月30日 金曜日 午後4時52分