Programmable Settings
18
Base unit ringer volume
Make sure the base unit is not being used.
To set the ringer volume to high (preset), medium, or low,
press
VOLUME
[
<
]
or
[
>
]
.
• To increase volume, press
VOLUME
[
>
]
. To decrease volume, press
VOLUME
[
<
]
.
• To stop ringing, press
[STOP]
.
To turn the ringer off,
press and hold
VOLUME
[
<
]
until 2 beeps sound.
• “
O
” is displayed.
To turn the ringer on,
press
VOLUME
[
<
]
or
[
>
]
.
• The base unit will ring at low level.
• You can adjust the ringer volume while an outside call is ringing. Press
VOLUME
[
<
]
or
[
>
]
while the base unit is ringing.
To turn the ringer off, press and hold
VOLUME
[
<
]
for 2 beeps sound.
“
O
” is displayed.
Ringer Tone
You can select the handset and base unit ringers to use one of 7 ringer patterns for
outside calls. “Tone 1” to “Tone 3” are bell ringer patterns. “Melody 1” to “Melody 4”
are melody patterns. The factory preset is “Tone 1”.
• You cannot change the ringer tone for intercom calls.
• If you subscribe to a Distinctive Ring Service (such as IDENTA-RING) from your
telephone company with 2 or 3 consecutive rings, select a bell ringer pattern
(Tone 1 to 3). If you select a melody pattern, you will not be able to distinguish
lines by their ringers.
• If you select one of the melody ringer patterns, the ringer will continue to sound for
several seconds if:
— the caller hangs up before you answer the call, or
— another person answers the call using another phone connected on the same line.
Handset ringer tone
1
Press
[MENU]
.
2
Scroll to “
Ringer setting
” by pressing
[
d
]
or
[
B
]
, then press the soft key (
Select
).
3
Scroll to “
Ringer tone
” by pressing
[
d
]
or
[
B
]
, then press the soft key (
Select
).
Base Unit
Handset
Ringer setting
Back
Select
K
d
B
L
Ringer tone
Back
Select
K
d
B
L
PQQX14302ZB.book 18 ページ ２００４年７月３０日 金曜日 午後４時５２分
