Panasonic KX-TG2357 Скачать руководство пользователя страница 58

Страница: 58 / 92

Listening to Messages

Using the Handset (Remote Operation)

If “

New message

” is displayed on the handset, new messages have been

recorded.
• If the Message Alert is turned on (p. 24), the Ringer/Message Alert indicator on

the handset will flash slowly when new messages have been recorded and the
handset is not in use.

To play back messages

• If a call is received during playback, the unit rings and playback stops. To answer

the call, press

[

]

[

]

. For playback, start again from the beginning after

hanging up.

• At the end of the last message, “

End of final message

” is heard. The unit will

announce the remaining recording time if it is less than 3 minutes.

• If you hear “

Memory full

” after playback, erase unnecessary messages (p. 60).

• When memo messages are played (p. 61), “

MEMO

” is displayed.

Voice menu

If you do not press any buttons at the end of the last message, the unit will
announce “

End of final message

” and the voice menu will begin.

The unit announces, “

Press 4 to play back new messages. Press 5 to play back all

messages

.”

• You can press buttons for other playback options (p. 59) even if the voice menu

has started.

• If you do not press any button within 10 seconds after the voice menu, the

handset will exit remote operation.

Press

[MENU]

Press

Select

at “

Message play

”.

• The unit announces the number of new messages

and only new messages are played back from the
speaker. To switch to the receiver, press

[

]

. To

switch back to the speaker, press

[

]

• When you have no new messages, the unit

announces “

No new messages. All message playback

”

and plays back all messages.

• When you have no messages, the unit announces

“

No messages

”.

• To play all messages, press

[5]

• If you do not press any button, the voice menu will

start (see below).

To end remote operation, press

[OFF]

Handset

Message play

Back

Select

MENU=Call back

4 =Erase msg

Repeat Skip

PQQX13991YA.book 58 ページ２００４年２月２５日　水曜日　午前１１時１２分

Содержание KX-TG2357





























































































Результаты поиска

Содержание KX-TG2357

Отзывы:

Похожие инструкции для KX-TG2357

Бренды по названию

Популярные бренды

Panasonic KX-TG2357, Руководство по эксплуатации

Результаты поиска

Содержание KX-TG2357

Отзывы:

Похожие инструкции для KX-TG2357

Бренды по названию

Популярные бренды