59
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
Problem
You cannot program items,
such as the dialing mode.
You cannot store a name
and phone number in the
directory.
While programming or
searching, the handset
starts to ring and stops the
program/search.
The unit does not display
the caller’s name and/or
phone number.
The handset display exits
the Caller List.
Cause & Remedy
•
Programming is not possible while the
handset is being used.
•
Do not pause for over 60 seconds while
programming.
•
Move closer to the base unit.
•
Ö
,
Ñ
,
Ü
or
á
may have been pressed
when you picked up the handset. Press
(OFF)
and try again.
•
If more than one other user is using the
handsets, you may not be able to program.
Try again later.
•
You cannot store an item in the directory
while the handset is in the talk, speakerphone
or intercom mode.
•
Do not pause for over 60 seconds while
storing.
•
To answer the call, press
or
. Start
again from the beginning after hanging up.
•
You need to subscribe to a Caller ID service.
•
Other telephone equipment may be
interfering with your phone. Disconnect it and
try again.
•
Other electrical appliances connected to the
same outlet may be interfering with the Caller
ID information.
•
Telephone line noise may be affecting the
Caller ID information.
•
The caller requested not to send his/her
information. See page 25.
•
If a call is being transferred to you, the caller
information will not be displayed.
•
Do not pause for over 60 seconds while
searching.
