Panasonic KX TG2258PW Скачать руководство пользователя

Страница: 54 / 72

Troubleshooting

Cordless Telephone

Problem

Cause & Remedy

“

No link to base. Place

on cradle and try

again.

” is displayed and an

alarm tone sounds.

• You are too far from the base unit. Walk

closer and try again.

• Place the handset on the base unit and try

again.

• Plug in the AC adaptor.
• Raise the base unit antenna.

Static, sound cuts in/out,
fades. Interference from other
electrical units.

• Move the handset and the base unit away

from other electrical appliances (p. 3).

• Walk closer to the base unit.
• Raise the base unit antenna.
• Select a clearer channel (p. 23,38).

The handset and/or base unit
does not ring.

• The ringer volume is set to OFF. Set to HIGH,

MEDIUM or LOW (p. 17).

• When the handset is on the base unit, the

handset does not ring. Only the base unit
rings when receiving a call.

The handset display is blank.

• Charge the battery fully (p. 8).

You cannot program function
items.

• Programming is not possible while the unit is

being used.

• Do not pause for over 60 seconds while

programming.

• Walk closer to the base unit.

While programming or
searching, the unit starts to
ring and stops the program/
search.

• A call is coming in. To answer the call, press

[

]

[

]

[SP-PHONE]

. Start again from

the beginning after hanging up.

You cannot make a call with
the handset.

• Your handset is in remote operation mode

(p. 44). Exit by pressing

[OFF]

You cannot redial.

• If the last number dialed was more than

32 digits long, the number will not be redialed
correctly.

Содержание KX TG2258PW









































































Результаты поиска

Содержание KX TG2258PW

Отзывы:

Похожие инструкции для KX TG2258PW

Бренды по названию

Популярные бренды

Panasonic KX TG2258PW, Руководство по эксплуатации

Результаты поиска

Содержание KX TG2258PW

Отзывы:

Похожие инструкции для KX TG2258PW

Бренды по названию

Популярные бренды